|
|
| Part: L100QFR26-QF-SMT-SD |
1 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
100-pins |
| Lead-pitch: |
0.65mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$230.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 100-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's very low profile, (only a 300 mils of added height), and small footprint, (the same as the QFP package), make it possible to use the actual device in field trials and/or in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The target can also be sent for evaluation to a customer. When the target is back from the customer, the SMT TOP can be removed and emulator or logic analyzer adapters can be plugged in.˜˜The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (100QFR26-SD) can be purchased at any time. |
| [Photos] |
| Part: L100QFS20-QF-SMT-SD |
2 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
100-pins |
| Lead-pitch: |
0.5mm |
| Adapter-top: |
TQFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$303.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 100-TQFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. Low profile of the TOP makes it suitable for slot and field applications. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (100QFS20-SD) can be purchased at any time. |
| [Photos] |
| Part: L112QFS26-QF-SMT-SD |
3 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
112-pins |
| Lead-pitch: |
0.65mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$235.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 112-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's very low profile, (only a 300 mils of added height), and small footprint, (the same as the QFP package), make it possible to use the actual device in field trials and/or in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The target can also be sent for evaluation to a customer. When the target is back from the customer, the SMT TOP can be removed and emulator or logic analyzer adapters can be plugged in.˜˜The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (112QFS26-SD) can be purchased at any time. |
| [Photos] |
| Part: L120QFS31-QF-SMT-SD |
4 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
120-pins |
| Lead-pitch: |
0.8mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$242.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 120-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (120QFS31-SD) can be purchased at any time. |
| [Photos] |
| Part: L128QFS31-QF-SMT-SD |
5 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
128-pins |
| Lead-pitch: |
0.8mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$248.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 128-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (128QFS31-SD) can be purchased at any time. |
| [Photos] |
| Part: L144QFS20-QF-SMT-SD |
6 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
144-pins |
| Lead-pitch: |
0.5mm |
| Adapter-top: |
TQFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$347.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 144-TQFP adapter with SMT TQFP pads replaces the package on the target's TQFP pads. The top part has TQFP pads for soldering of the package. The adapter's small footprint, (the same as the TQFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP TQFP adapter uses the same SMT TQFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (144QFS20-SD) can be purchased at any time. |
| [Photos] |
| Part: L144QFS26-QF-SMT-SD |
7 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
144-pins |
| Lead-pitch: |
0.65mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$265.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 144-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (144QFS26-SD) can be purchased at any time. |
| [Photos] |
| Part: L160QFS26-QF-SMT-SD |
8 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
160-pins |
| Lead-pitch: |
0.65mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$288.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 160-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (160QFS26-SD) can be purchased at any time. |
| [Photos] |
| Part: L168QFS26-QF-SMT-SD |
9 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
168-pins |
| Lead-pitch: |
0.65mm |
| Adapter-top: |
QFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$305.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 168-QFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (168QFS26-SD) can be purchased at any time. |
| [Photos] |
| Part: L208QFS20-QF-SMT-SD |
10 of 18 |
News Flash |
| Products: |
QFP-TQFP-SMT-top-to-QFP-TQFP-pads |
| Package-pin-count: |
208-pins |
| Lead-pitch: |
0.5mm |
| Adapter-top: |
TQFP-pads |
| Adapter-vertical-clearance: |
170-mils |
| Price: |
$466.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Low profile 208-TQFP adapter with SMT QFP pads replaces the package on the target's QFP pads. The top part has QFP pads for soldering of the package. The adapter's small footprint, (the same as the QFP package), makes it possible to use the acutal device in field trials, in confined spaces, as well as on the bench, to compare the results achieved with an emulator to those achieved with the real chip. The height of the TOP (500 mils) makes it easy to remove the TOP by hand. The SMT TOP QFP adapter uses the same SMT QFP base as all other Aprilog.com adapters (i.e. emulator, logic analyzer and ZIF socket top, etc. adapters.) The adapter is a two part set (TOP and base). The price listed includes the base. Additional bases (100QFR26-SD) can be purchased at any time. |
| [Photos] |
|
|
qfp-adapter.com 
